Linear Actuator Stroke Length 500MM 7mm/S 1000N 12V

The linear actuator stroke length 500MM 7mm/S 1000N 12V is an electric push rod that transforms the rotary motion of the motor into linear reciprocating motion. It consists of a drive motor, reduction gear, screw, nut, guide sleeve, push rod, sliding seat, shell, and micro motion control switch.

• Directly Connect With Ac Power: Avoid connecting the actuator directly to AC power to prevent serious damage.,
• Exceed Maximum Push/Pull Limits: Do not apply forces greater than the specified 1000N limit.,
• Forcefully Stop Mid-Stroke With Power: Do not abruptly stop the actuator mid-stroke while it is still powered.

• Use In The Specified Voltage Environment: Ensure to operate the linear actuator within the specified 12VDC voltage range.,
• Follow Maximum Push/Pull Limits: Do not exceed the maximum force rating of 1000N to prevent damage.,
• Allow The Stroke To Finish Before Powering Off: Avoid forcing the actuator to stop mid-stroke while still powered.

• Value: ≤2A,
• Description: Ensure that the current draw does not exceed 2A to prevent overloading.

• Value: 337.2 lbs. (1500 Newtons),
• Description: Do not exceed the maximum static load capacity of 337.2 lbs. (1500 Newtons) to avoid damage.

• Description: Connect the linear actuator to a 12VDC power source using appropriate wiring and connectors.

37mm

620mm

63 × 9 × 5 cm

1.5 kg

1476g

77mm