1.8V – 12V/2A DC Motor PWM Speed Regulator

The DC Motor PWM Speed Regulator allows controlling the speed of a DC motor by adjusting the Duty Cycle of a Pulse-Width-Modulated (PWM) DC voltage. It provides a continuous current of 2A to the connected DC motor or load.

• Do Not Exceed The Maximum Voltage Rating Of 12v.: Avoid applying a voltage higher than 12V to the circuit.,
• Do Not Reverse The Polarity Of The Voltage Connection.: Ensure correct polarity to prevent damage to the circuit.,
• Do Not Exceed The Maximum Current Rating Of 2a.: Avoid drawing a current higher than 2A from the regulator.

• Connect Your Dc Motor (Or Dc Load) To The Motor Terminals.: Ensure proper connection to the motor terminals.,
• Connect A Voltage Of 1.8v-15v Dc To The Circuit With Correct Polarity.: Ensure correct polarity when connecting the voltage.,
• Control The Motor Speed Through The Potentiometer.: Use the potentiometer to adjust the speed of the motor.

• Maximum: 2A

• Minimum: 1.8V,
• Maximum: 12V

• Step 1: Connect the DC motor (or DC load) to the motor terminals.,
• Step 2: Connect a voltage of 1.8V-15V DC to the circuit with correct polarity.,
• Step 3: Control the motor speed using the potentiometer.

3mm

5.08mm

6 × 4 × 1 cm

0.02 kg

16g