8 Channel Servo Controller SC08A

The 8 Channel Servo Controller SC08A offers reliable and user-friendly control of RC servo motors. It can control 8 channels of servo simultaneously, with the ability to deactivate any servo channel at any time and set the initial position of any channel at startup. Each servo signal pin can generate servo pulses ranging from 0.5 ms to 2.5 ms, allowing for servos to operate 180 degrees. SC08A can be daisy-chained to control up to 16 RC servo motors independently.

• Avoid: Exceeding the specified servo pulse range of 0.5 ms to 2.5 ms.

• Use: Control up to 8 channels of servo independently.,
• Deactivate: Deactivate or activate any channel of the servo.,
• Set Position: Set the initial position of any channel at the next start-up.

0.25μs

9600 baud rate

• Pc/Laptop: Connect with USB to serial (UART) converter.,
• Microcontroller: Connect with UART interface.

14

48

46