Pololu MP6500 Stepper Motor Driver Carrier, Potentiometer Current Control

The Pololu MP6500 Stepper Motor Driver Carrier utilizes a potentiometer for current control to regulate the maximum current output per phase. It offers microstepping resolutions of full-step, half-step, 1/4-step, and 1/8-step, allowing for precise control over the stepper motor movement.

Do not exceed the maximum current per phase limit of 2.5 A to prevent damage to the stepper motor driver.

Use voltages above the stepper motor's rated voltage to achieve higher step rates by adjusting the current control potentiometer.

1.5 A per phase

• Current Per Phase: 2.5 A

4.5 V to 35 V

• 1: Ensure the stepper motor driver is powered within the specified voltage range of 4.5 V to 35 V.,
• 2: Connect the stepper motor to the driver's output terminals, ensuring correct polarity.,
• 3: Adjust the current limit using the on-board trimmer potentiometer as needed for your application.,
• 4: Provide step and direction signals to control the stepper motor movement.

11 × 9 × 2 cm

0.015 kg