DFRobot Indoor ENS160 Air Quality Sensor – I2C

The ENS160 Air Quality Sensor utilizes a combination of TrueVOC™ technology and metal oxide (MOX) technology to detect indoor air quality. It measures various IAQ data such as TVOC, eCO2, and AQI. The sensor includes intelligent on-chip algorithms that provide accurate and easy-to-understand environmental data.

TrueVOC™

MOX

• Avoid Condensation: Do not expose the sensor to environments where condensation may occur as it is only designed for non-condensing humidity conditions.,
• Exceed Voltage Limits: Do not supply the sensor with a voltage outside the 3.3V to 5V range to avoid damaging the sensor.

• Preheat: Preheat the sensor for 3 minutes before use to ensure accurate readings.,
• Check Operating Conditions: Ensure the sensor operates within the temperature range of -10°C to 80°C and humidity range of 5%RH to 95%RH (non-condensing).

• Minimum: 5%RH,
• Maximum: 95%RH (Non-condensing)

• Minimum: -10°C,
• Maximum: 80°C

• Minimum: 3.3V,
• Maximum: 5V

• Steps: Connect the sensor to a microcontroller using the I2C communication protocol. Use the I2C address 0x53 for communication.

1m

16 × 12 × 2 cm