Orange 4mm PNP Inductive Proximity Sensor RM12 DC6~36V (Unshielded)

The Orange 4mm PNP Inductive Proximity Sensor RM12 DC6~36V (Unshielded) detects metal objects when they come into its operating range. It operates by generating an electromagnetic field and sensing changes in this field caused by the presence of a metal object.

Inductive

• Avoid Excessive Force: Do not apply excessive mechanical force to the sensor to prevent damage.,
• Prevent Exposure To Extreme Conditions: Avoid exposing the sensor to temperatures outside the -30 to 80°C range to maintain its integrity and functionality.,
• Ignore Polarity: Do not reverse the polarity of the connections as it may lead to sensor damage despite the built-in protection.

• Ensure Proper Voltage: Make sure the sensor is connected to a power supply within the specified range of 6 to 36 VDC to ensure proper operation.,
• Check Installation Type: Install the sensor as a non-flush (unshielded) type to allow the electromagnetic field to radiate properly.,
• Observe Detection Distance: Maintain a detection distance of up to 4mm from the target object for optimal performance.

• Output Current: Maximum 200 mA,
• Insulation Resistance: Minimum 50 MOhm

• Temperature: -30 to 80°C,
• Protection: IP67 - Dustproof, vibration proof, waterproof, and oil proof

• Range: 6 to 36 VDC,
• Nominal: 30 VDC

• Short-Circuit Protection: Ensure connections are secure to utilize the sensor's short-circuit protection effectively.,
• Inverted Connecting Protection: Be mindful of the wiring polarity to take advantage of the inverted connecting protection.

• Description: The sensor has a three-wire configuration with a red LED indicator. Connect the wires according to the PNP normally open output type.

Ø4, 3-Wire, 2 Meter length

Cylinder type, M12 diameter, 62mm length

11 × 8 × 5.5 cm

60g